Modified Class - Rules
Modified 2wd/4wd
1. Truck may not weigh more than 6.5 ounces.
2. Battery 8-12vdc total may be used in any combination.(#cells) If mounted outside of vehicle body, shall be painted or covered to simulate weights, bumpers, etc. Shall immulate part of the vehicle. (look realistic) Must carry own power source.
3. Tires and wheels: Any size or width within vehicle size requirements. Must be rubber base. May be re-treaded or cut to individuals pattern.
4. Chassis: Wheelbase and width shall not be altered.
5. Must use an external switching device. Factory switch is removed.
6. Motor and Drivetrain: Stock gears. May remove the second set of gears. Replacement motor has to readily available and fit into original position.
7. Hitch: May be the stock loop or a screw-eye type and cannot be more than 1 1/4” measured from a level surface.
8. Weights: May be added to achieve the correct weight and balance, but should present a realistic appearance if placed on the outside of the vehicle but must be securely attached to vehicle.
9. Lights may be disconnected or removed if desired.
10. Body: Must maitain cab portion of body.
11. Size: 3” wide x 6” long x 2.5” high.
Past Winners
