Turn your Lightforce XGT lights into HID's by buying these instructions, and then by either bidding on a au$100.00 to au$300.00 H3 HID kit from ebay, or by buying directly from an online shop, such as www.bitdistribution.com.au or http://www.brightlightautoparts.com/HIDKits.html. Then simply convert them as shown, step by step in the 18 page instructions.
XGT lights do not need an adapter to hold a HID bulb!
H3 HID bulbs will fit, and will fit very well!
What you are buying:
* 18 double-sided pages of coloured step by step pictorial instructions.
What you need to purchase separately:
* H3 HID kit
Tools you need to do the job:
* Silicon, drill press, 18 or 19 (3/4") drill bit, round and flat files, flat & philips screwdriver.
Installation can take around 30 minutes per light, however will need to allow the silicon to dry overnight.
The alloy heatsink in the XGT light houses a JCD bi-pin bulb mount called the 'GY6.35' and of course the bi-pin bulb. Basically you throw this away, and mount a H3 HID bulb in its place. These instructions show you step by step, and a picture by picture on how to do this process. Mount the light back on to your bull bar, mount the external ballasts that came with the H3 HID kit, and *walla*. HID lights for a fraction of the price of real ones.
The results are incredible!
Along with the fact that rather than the original XGT lights are sucking 200 watts, these suck only 6.5 amps --- 70 watts (if you use a 35watt kit). Or if your more keen, you can purchase a 42 watt or the 50 watt kits.
Standard night time setting on digi camera, taken from bullbar.
Standard night time setting on digi camera, taken from roof.
the photo session setup.
Techone 6000k verses Supervision 6000k.
Created: Oct 2k5.
Last updated: 24/May/2k8.
