_{Figure 1}

_{Figure 2}

Click on Add

_{Figure 3}

A smaller prompt box will pop out. Enter a description for your trigger. Example,

My E-Hub Movies.

_{Figure 4}

Click OK once you are done. Next dialog box that pop out will prompt you for the location of the welcome.txt file. Search for this file under your E-Hubbers MIRC folder. It should be inside.

_{Figure 5}

In the next dialog box, you should search for the directory where the files are kept.

_{Figure 6}

After choosing the directory, click on OK. You will be brought back to the main File Server Manager dialog. Click on the trigger you have just created. (Make sure it is highlighted as shown in the new Figure).

_{Figure 7}

Next, make sure the All Channels checkbox is NOT checked.

_{Figure 8}

Next, type the channel name #E-Hub and click on Add.

_{Figure 9}

After adding the channel, click on the trigger again (make sure it is highlighted.) and check the /CTCP Trigger checkbox. The final correct setup should look like the Figure 10 below.

_{Figure 10}

If an error occurs as shown below, just click OK. Nothing is wrong.

_{Figure 11}

• Go to E-Hubbers -> Servers Active -> ON.
  
• Then right click in the channel #E-Hub -> Force Advertise -> This Channel Only.

• Go to E-Hubbers -> Active Servers -> and choose OFF.
  
• However, unless you go E-Hubbers -> File Manager to manually select the file that is sending and click 'Requeue' to save it, the file will continue to be sent till it has completed.