986529 PARKING BRAKE ALARM   1. Cut windshield wiper suction lower hose 2
inches from dash mat and insert TEE con
Procedure for Installing Parking Brake Alarm   nector. (See figure 2.)

on all Model Passenger Cars.   2_   Assemble parking brake alarm hose to park

ing brake alarm assembly and then to TEE
connector.

1.   Loosely locate parking brake alarm on park
ing brake lever housing with spring over
parking brake lever guide pin in shaft. Start
engine with parking brake fully released.
Pull parking brake alarm upward on shaft
until alarm stops whistling, then secure
parking brake alarm at this position. BE
SURE THAT PARKING BRAKE LEVER
GUIDE PIN CAN MOVE FREELY WITH NO
INTERFERENCE FROM PARKING BRAKE