| Previous | Toc | Next |
10,
Cut the manifold to windshield wiper motor
tube 1 inch from dash mat in the drivers
compartment and insert -"Y"
fitting. Take
the remaining large diameter tube and run
from the "Y" fitting to the upper fitting on
the windshield wiper control mounted on the
instrument panel.
11.
Remove windshield wiper control knob from
instrument panel by loosening set screw and
remove dummy plug as shown in direction
of arrow, replace with valve push rod and
reassemble, (see figure 224).
Figure 224
| Previous | Toc | Next |
