Re: [PROTEL EDA USERS]: A pasting array of P99se sp5

[Dennis Saputelli <dsicon@integratedcontrolsinc.com>]

turn off snap to center while doing this, its a bug, you don't need the
temporary fiducial

Dennis Saputelli

"N-Luo/Yu-Ming (C9%I/z INC)" wrote:
> 
> Dear members,
> 
> Since I moved to Protel99SE SP5, I got a problem on pasting array. ie, I
> place a pad with designator 1, Then select and copy it, Then paste array,
> set the text increment to 1, It works fine. But when I place another pad
> with desinator 2, then select and copy all two pads, then paste array, also
> set the text increment to 1, But the desinator of the pads do not increase
> at all. all the pads keep the same desinator. would tell me why?
> 
> I often use the paste special function to create a panel, when I select and
> copy the entire board, then paste to the new boards, I find that it's so
> difficult to aim it. I also recall you had discussed that, and now I always
> use via as the fiducial point. I can sure the reference point which I copy
> and paste from are homologous absolutely, But everytime The pasted is been
> shifted with same offset. Why? Is the board is too large for that?
> 
> __________________________________
> Off topic:
> 
> What can I do for you?
> 
> I am looking for a part-time job on the net. I have got good skill in
> protel, and I have completed many high density boards, Just now I finished a
> two layers boards with 543 components(485 top and 58 Bottom), 520 nets, 3236
> pads. I have gained plentiful experiences in pcb design layout, good quality
> and timely, DFM (Design For Manufacture), DFT (Design For Test), and so on.
> I am looking forward to do something for you. Since I come from china, and
> now working for a foreign company. I can do that during spare time. If the
> layout task is not so often in your company, If your schedule is urgent, if
> you have tired of layouting, you can send the board to me,   Please write to
> dracula_nj@email.com if you believe me.
> 
> Sorry for disturbing you. Thanks a lot,
> 
> Best Regards,
> Robert,
> 2000.09.09
> 

-- 
___________________________________________________________________________
www.integratedcontrolsinc.com            Integrated Controls, Inc.    
   tel: 415-647-0480                        2851 21st Street          
      fax: 415-647-3003                        San Francisco, CA 94110