|
Installation Tech Tips
Do not take Door off during installation Please follow the detailed instruction manual step by step
We suggest you create a L Bracket during installation process
Make sure the mounting surface is flat as possible, if anything is there, grind the surface so the vertical door kit can sit and mount flat.
Make sure both allen screw adjustment on each system are adjusted accordingly.
Do not cut the wire extension that come with the kit. All wire extension are 14 inches.
The kit requires no modification, the kit is a bolt on, but MOST INNER FENDERS MUST BE ROLLED
For Tech Support, please call our tech support department 626-564-9666 M-F 9-5 PM (Pacific Standard Tine) Before you call please have questions ready to ask, We are more than happy to answer any technical problems.
 |
2003 - 2005 Hummer H2Use cutting wheel and cut to make look like in picture. |
 |
 |
|
Home