1936 International Model F-20
This is what we ended up with after nearly 2 years of work. (Rebuilding pictures below)
This is what we started with.....The tractor had been out in the weather for several years and the engine was stuck for at least 7 years.
And this is some place in the middle. Each wheel/rim took me over 8 hours to scrape and sand. I didn't have a sandblaster then.
As you notice in this picture I would take off a part (the gas tank) scrape, sand and prime, then do the same to the mounting
area and then put it back on. I had the tractor apart four or five times through out the process.
Roy out on a test drive without a hood and some other parts.
Roy out at the F-20's first pull. No first place but still a lot of fun!
Back to the Home Page
