Pamphlet 86 Electrician
Site hosted by Angelfire.com: Build your free website today!
Go to Bottom of Page

Pamphlet 621-86

27 Sept 1977

APPENDIX A

Work Process Schedule for the Trade of

Electrician

DOT Code: 824.261.010

AIMS Symbol: 0159

Element Work Processes Hours
A Preliminary Work-- (1) Learn names and uses of equipment, to include kind, size, and use of cable, wire, boxes, conduits, various switches, cutouts and receptacles. (2) Learn names, uses, and care of hand power tools used in assembling electrical materials; maintain special purpose equipment and tools used on interior electrical work. 600
B Residential and Commercial Rough Wiring-- (1) Select proper material from supply. (2) Lay out materials and equipment on job site in accordance with blue-prints. (3) Cut wire, cable, conduit, and raceway; thread and ream conduit, bore and cut chases under the direction of supervisor (Journey-man). (4) Install service entrance/distribution panel. (5)Install armored and non-metallic sheathed cable. (6) Install and connect switches, outlets, junction boxes, plugs, and light fixtures with proper methods of splicing. (7) Install conduit systems. (8) Install service switches or load centers connecting these parts, run raceways, pull in conductors under direction of supervisor (Journeyman). (9) Test interior electrical circuit for proper operation using proper electrical instruments and test equipment. 2500
C Residential and Commercial Finish Work-- (1) Inventory interior wiring materials to determine if materials provided are as required per specifications. (2) Load balance interior circuits. (3) Compute the circuit total connected load per phase. (4) Determine individual load arrangement on circuit to achieve a balanced circuit condition. (5) Calculate proper wire size and types of fuses to support circuit. (6) Lay out the circuit in accordance with the specifications. (7) Install and connect various types of fixtures. (8) Connect service entrance conductors and devices. (9) Trace polarity of conductors and devices. (10) Determine appropriate grounding method and requirements and test circuit to locate and correct job defects. (11) Inspect interior electrical system/components installation for compliance with specifications and the rules of National Board of Fire Underwriters and appropriate local regulations. 1500
D Industrial Lighting and Service Installations-- (1) Install rigid conduit, electric thinwall metallic tubing, BX armored cable, and wiremolds on all types of heavy electrical equipment and major size service entrance installations. (2) Select required transformer. (3) Connect single transformers into system. (4) Connect transformers in series. (5) Parallel single-phase transformers. (6) Parallel three-phase transformers. (7) Connect transformers in banks. (8) Connect transformers for special application. (9) Adjust transformers. (10) Install fuses in system. (11) Install wiring and remote controls for air conditioning. 2000
E Troubleshooting-- (1) Repair all kinds of electrical work. (2) Check out trouble and make repairs under direction of supervisor/journeyman. (3) Check out trouble and make repairs without supervision. 1000
F Motor Installation and Control-- (1) Select correct motor to support given requirements. (2) Connect single-phase motors. (3) Connect poly-phase motors. (4) Install motor controller. (5) Select correct motor protective devices. (6) Align motors in accordance with manufacturers' specification and other requirements. (7) Perform motor operational test. (8) Perform minor maintenance on motors and control equipment. 400
Grand Total 8000

Special Instructions: Work processes completed in a state or federally recognized apprenticeship program will be accepted upon presentation of proper documentation to the appropriate service school.

Appendix B

Schedule of Related Instruction for the Trade of

Electrician

DOT Code: 824.261.010

AIMS Symbol: 0159

A total of 576 hours of related instruction is required in order to complete this program. Related instruction credit may be awarded individuals registered in the trade of Electrician taken from an accredited institution, providing the courses are similar to the courses taken for a Electrician program in a community college/vocational school.

End of Pamphlet 621-86 Electrician

Return to List of Fort Bragg Apprenticeship Programs

Home Page of Fort Bragg Apprenticeship Program

Return to List of Potential Pope AFB Apprenticeship Programs

Home Page of Pope AFB Apprenticeship Program

Return to Top of Page