| Snake Eyes |
|
Irons Woods Wedges Putters |
| Golfsmith |
|
Irons Woods Wedges |
| Dynacraft |
|
Irons Woods Putters |
| Spalding |
|
Irons Woods |
| Killer Bee |
|
Irons Woods |
| Harvey Penick |
|
Irons Woods |
| T Knocker |
|
Irons Woods Titanium |
|
| Better Golf |
|
Golf Tips Club Fitting Putter Fitting Swing Exam Handicapper |
| Information |
|
Sensicore Spine Align Custom Fitting Freq Match Freq Flex Weight Sort Club Facts 1 Club Facts 2 Club Terms Dictionary FAQ's |
| Humor |
|
Jokes Excuses |
| About TKG |
|
Policies Guarantee Testimonials TKG Banner About Me |
| Free Golf Tip |
|
To receive a free golf tip every week. Enter E-mail |
I have made a new web site..Go Here
All component parts on this site are no longer available and I do not have them in stock.
Please go to my new site to see available club heads.
"Build Your Own Golf Clubs"
If you like this golf club head:
1..
Write down it's "Cost" and "Part Number"
2..
Then click on one of the "Golf Shaft Options"
below.
3..
Follow the instructions for the "Total Cost".
TOMMY KNOCKER TURNER 306
Tommy Knocker Golf.......Disclaimer
The all new Turner irons incorporates a copper horizontal weight system to lower the center of gravity.
This iron is very forgiving with a progressive offset and an oversize design. It is constructed with a quality 431 stainless steel and is good for all skill levels!
Available Right & Left Hand
3-PW sold as a set ONLY!
| PART NUMBER | COST PER HEAD |
| DT10 | $11.95 |
| GOLF SHAFT OPTIONS | |
| Steel Shafts.... Go Here | |
| Graphite Shafts.... Go Here | |
Matching Woods... None
| NO. | LOFT | LIE | WEIGHT | OFFSET |
| 3 | 20° | 59° | 244g | 7.7 |
| 4 | 23° | 60° | 251g | 7.2 |
| 5 | 27° | 61° | 258g | 6.7 |
| 6 | 30° | 62° | 265g | 5.7 |
| 7 | 34° | 63° | 272g | 5.2 |
| 8 | 38° | 63.5 | 279g | 4 |
| 9 | 43° | 63.5° | 286g | 3.5 |
| PW | 47° | 64° | 295g | 2.7 |
| SW | 55° | 64° | 302g | 1.7 |