Galil Services

Choose your Options:	Price
Time Barrel and Headspace: To properly barrel and headspace a Galil, a new barrel must be provided with the kit barrel. The gas block and hand guard retainer will be used from the old barrel. We will press and pin the gas block on the new barrel, drill the new gas passage, cut extractor relief, and cut the hand guard retainer groove. Note: Add $50 if we have to mill flats on your new barrel. Important note: Galil kit barrels were headspaced to a specific military receiver, which you presumably don't have. To safely headspace the the new receiver (i.e., pass the GO, NOGO, FIELD gauge checks), a NEW barrel must be used.	$325

Individual Services:
Add epoxy-based paint to dust cover and gas tube (similar to original)	$40
*Add air-brushed and baked* epoxy-based paint to dust cover and gas tube (similar to original)**	$70
Modify and install semi-auto trigger parts (you supply parts)	$50
Remove gas block from barrel (Note: Gas blocks are extremely difficult to remove and are easily damaged even when using a hydraulic press. We are NOT responsible for damaged gas blocks.)	$40
TIG weld folding buttstock in open position	$40
Mill wrench flats on new barrel	$50
*Note: Services below requiring lathe work, the barrel must be sent separated from receiver.*
Permanently install muzzle device (1100+ degree silver solder per ATF) [Note: We use high quality Harris Safety Silv 40% silver wire, not jewelry paste]	$40
Cut-off, crown, lap, and thread barrel [Note: Muzzle device must be sent with barrel for proper fitting]	$55
Thread barrel only [Note: Muzzle device must be sent with barrel for proper fitting and permanent attachment (If we do the threading, we must do the attachment)]	$45
Hand-paint lettering	$30
Prices Subject to Change

Galil Services/Pricing

We are now introducing services and kit building for the Galil battle rifles. We provide full Kit Builds with epoxy-based Painted finishes.