Building/Construction
ASPHALT SHINGLE ROOF SYSTEMS Fee: $55
This course provides students a general knowledge of residential
roofing systems and how to provide a weather-tight barrier from wind
and water using asphalt shingle products. Students will be taught
roofing terminology, shingle application methods, project layout,
fastening, asphalt felt, and flashing methods. This course is
appropriate for those seeking entry-level positions in the
residential construction industry and residential property owners.
This course provides hands-on training.
Instructor: Gene Taylor
| Sat | 9:00-12:00 N | Apr 12-Jun 14 | 30 hrs | 62066 | CBI 127 |
BASIC ELECTRICAL WIRING (RESIDENTIAL) Fee: $55
This course will provide an overview of electrical wiring
techniques and is suitable for students with no prior knowledge of
electrical theory or installation. While electrical fundamentals
such as Ohm's law will be examined, emphasis will be placed on the
design and installation of residential electrical systems. Topics
will include an overview of home electrical systems, circuit design,
electrical tools and test equipment, cable and wire types,
calculation of circuit capacity, mapping and tracing circuits,
troubleshooting, and electrical inspections. This course
provides hands-on training.
Instructor: Carol Replinger
| M&W | 6:00-9:00 pm | Apr 07-May 07 | 30 hrs | 62067 | CBI |
| M&W | 6:00-9:00 pm | May 19-Jun 23 | 30 hrs | 62069 | CBI |
Instructor: Bill Rinehart
| T&Th | 8:30-11:30 am | Apr 08-May 08 | 30 hrs | 62068 | CBI 125 |
BASIC RESIDENTIAL PLUMBING Fee: $55
This course provides basic instruction in plumbing fundamentals and
skills as applied to the home building trade. Topics will include
installation and connection of plumbing fixtures; residential hot
and cold water piping, wastewater piping, sewer and septic systems,
and tools and material selection. This course provides
hands-on training.
Instructor: Bill Rinehart
| T | 6:00-9:00 pm | Apr 08-Jun 10 | 30 hrs | 62070 | CBI |
BASIC RESIDENTIAL WOOD FRAME CONSTRUCTION Fee: $55
This course provides students a general knowledge of residential
construction fundamentals, terminology, cutting techniques, tools,
equipment, and materials used in wood frame building construction.
Students will be taught carpentry framing skills, which include
rough wall, floor, and roofing techniques. Instructional methods
will include both classroom and hands-on shop instruction. This
course is appropriate for those seeking entry-level positions in the
residential construction industry and residential property owners.
This course provides hands-on training.
Instructor: Bill Rinehart
| Sat | 9:00-12:00 N | Apr 12-Jun 14 | 30 hrs | 62071 | CBI 126 |
BLUEPRINT READING/COST ESTIMATION Fee: $60
Are you building your own home or interested in becoming a general
contractor? Are you having difficulty in reading and understanding
the plans and drawings provided by designers, builders and
architects? Here is a course designed especially for you. The course
will cover such information as symbols, abbreviations, and
conventions. Sketching principles and practices in orthographic and
pictorial form are also included. You will learn to effectively
interpret, translate, and use materials in your construction
projects. It will also cover the different methods of material
take-off and cost estimation for residential and commercial
construction. Emphasis will be to help the professional contractor
as well as the individual who is preparing for the North Carolina
Contractor's Examination.
Instructor: Gene Taylor
| M&W | 6:00-9:00 pm | Apr 07-Jun 23 | 66 hrs | 90204 | FTCC/CEC |
CABINETMAKING (INTERMEDIATE) Fee: $60
A follow-up to Cabinetmaking (Introduction), this course
provides hands-on training in advanced cabinetmaking techniques.
Emphasis will be placed on building individual projects using a
variety of wood joinery and sophisticated cutting techniques. Upon
completion, students should be able to design, identify materials,
and construct wooden projects within specification. This
course provides hands-on training.
Instructor: Boyd Sprague
| Sat | 8:30 am-1:30 pm | Apr 12-Jun 14 | 50 hrs | 62072 | CBI 120 |
ELECTRICAL CONTRACTOR'S LICENSE RENEWAL – PREPARATION UNIT
5 Fee: $50
Electrical contractors are required to complete eight (8) contact
hours of continuing education per year to be eligible for
relicensing. This course will provide contractors with updated
information on the changes in the National Electric Code, the NC
Electric Code, and local utility company requirements. It will also
provide information on the rules governing garages, hospitals,
assemblies, mobile and manufactured homes, recreational vehicles and
parks, pools, fountains, and fire pumps. This is a
self-supporting class; Fee-exempt status does not apply.
Instructor: Frank Arnold
| Sat | 8 am-5 pm | Apr 05 | 8 hrs | 61020 | CBI 111 |
ELECTRICAL CONTRACTOR'S LICENSE RENEWAL – PREPARATION UNIT
6 Fee: $50
Electrical contractors are required to complete eight (8) contact
hours of continuing education per year to be eligible for
relicensing. This course will provide contractors with updated
information on the changes in the National Electric Code, the NC
Electric Code, and local utility company requirements. It will also
provide information on classified locations, remote signaling and
power limited circuits, fire alarm systems, and communication
systems circuits. This is a self-supporting class;Fee-exempt
status does not apply.
Instructor: Frank Arnold
| Sat | 8 am-5 pm | May 24 | 8 hrs | 61021 | CBI 111 |
GENERAL CONTRACTOR'S LICENSE PREPARATION Fee: $60
This course examines the licensing process and reviews and explains
pertinent information relating to the building trades for
residential and general contractors. You will gain a general
knowledge of contracting in areas including plan and specification
reading, cost estimation, construction theory, and safety
requirements. Students will be required to purchase books and
building plans. Additional information on North Carolina's general
contractor's licensing requirements is available on the North
Carolina Licensing Board for General Contractors' website–http://www.nclbgc.net/pages/faq_txt.html
Instructor: Jerry Thompson
| T&Th | 6:00-9:00 pm | Apr 08-Jun 19 | 66 hrs | 90205 | FTCC/CEC 133 |
HOME INSPECTOR'S LICENSURE PREPARATION Fee: $60
Home inspectors are being hired more and more often by prospective
home buyers. They can report on the condition of a newly built or
previously built home's major systems, components, and structure. If
youFeel that this is a career you might be interested in, this
course will help you prepare. It is designed to meet the minimum
standards of practice in order to pre-qualify for the Home
Inspector's Licensing test as a licensed Home Inspector or a
licensed Associate Home Inspector in accordance with the
specifications as set forth by the Home Inspector's Licensure Board
of the North Carolina State Department of Insurance. Textbook
requirement: NC Building Code 2006.
Instructor: Jerry Thompson
| M&W | 6:00-9:30 pm | Apr 07-May 07 | 35 hrs | 90206 | FTCC/CEC 133 |
MASONRY (INTERMEDIATE) Fee: $60
A follow-up to Masonry (Introduction), this course provides
practical experience in cost estimating, foundations, bonding,
expansion joints, wall ties, and tiling. Emphasis is placed on
material estimation, layout of footing, construction of walls and
reinforcements. Projects will be included in the course. Upon
completion, students should be able to determine cost, plan layout,
and construct masonry projects in compliance with local building
codes. This course provides hands-on training.
Instructor: Derrell L. Carter
| Sat | 8:30 am-12:30 pm | Apr 12-Jun 14 | 40 hrs | 62073 | CBI 119 |
PLUMBER'S ASSISTANT Fee: $55
This course provides students a foundation of knowledge to compete
for entry-level positions within the residential plumbing industry
as plumber's helpers and assistants. Students will be taught
plumbing terminology, measuring, cutting, and soldering copper pipe
and fittings, cutting and joining plastic piping, and the correct
use of select plumbing tools. This course will also cover location
and repair of leaks, galvanized pipe, gas pipe, steel fittings, pipe
support brackets and hangers, unclogging drains, toilets, and sinks,
and the setting of select plumbing fixtures. This course is
appropriate for those seeking employment opportunities in the
plumbing career field and residential property owners. This
course provides hands-on training.
Instructor: Bill Rinehart
| W | 8:30-11:30 am | Apr 09-Jun 11 | 30 hrs | 62074 | CBI 119 |
AC/HVAC/Refrigeration
CIRCUITS AND CONTROLS Fee: $60
This course provides a simple and accurate understanding of
electrical energy fundamentals, electrical circuit theory,
electrical circuit components, wiring systems, and the
troubleshooting of circuits and controls in heating and cooling
equipment. This course provides hands-on training.
Instructor: Ralf Zappe
| T&Th | 6:00-8:30 pm | Apr 08-Jun 12 | 50 hrs | 62075 | CBI 124 |
EPA REFRIGERANT RECOVERY/RECYCLING CERTIFICATION Fee:
$55
This course is designed to prepare technicians for the CFC
Recovery/Recycling Certification examination given on the last class
date. The course will include a core materials component for small
appliance technicians. Further, the characteristics of refrigerants
used for short-term, long-term, high, medium, and low-pressure
applications will also be covered. The NC State Board of
Refrigeration charges $25 for the exam.
Instructor: Andrew Stewart
| Sat | 9 am-1 pm | Apr 12-Apr 26 | 12 hrs | 62083 | CBI 124 |
| Sat | 9 am-1 pm | May 17-May 31 | 12 hrs | 62084 | CBI 124 |
FUNDAMENTALS OF REFRIGERATION II Fee: $60
This course is the second of two parts designed to provide a
more in-depth understanding of heating, ventilation, and air
conditioning systems. Zoning, controls, airflow, piping, startup and
servicing, warm air, and hydronics are some of the advanced topics
to be covered.
Instructor: Hal Smith
| M&W | 6:00-8:30 pm | Apr 07-Jun 16 | 50 hrs | 62076 | CBI 124 |
HEAT PUMP TECHNOLOGY Fee: $60
This course is designed to provide a working knowledge and
understanding of heat pump technology for those desiring employment
in the field of heating, ventilation, and air conditioning and those
already employed. This course will address laws of refrigeration,
air properties, refrigerants and recovery techniques,
pressure-temperature relationships, heat transfer, types of systems,
basic controls, components, and troubleshooting techniques
specifically focused toward heat pump technology. This course
provides hands-on training.
Instructor: Andrew Stewart
| T&Th | 6:00-8:30 pm | Apr 08-Jun 12 | 50 hrs | 62077 | CBI 128 |
MAJOR APPLIANCE INSTALLATION AND REPAIR Fee: $55
This course equips the individual with skills to compete for
entry-level positions in the appliance repair and facility
maintenance industry. Taught by an appliance repair company owner
and technician, the course content will cover diagnosing system
failures, troubleshooting component problems, and preventive
maintenance on refrigerators, freezers, washers and dryers, and
other appliances as time and interest allows. CLASS SIZE IS
LIMITED TO 12. This course provides hands-on training.
Instructor: Matthew Edwards
| Sat | 8:30-11:30 am | Apr 12-Jun 14 | 30 hrs | 62078 | CBI 129 |
CONTRACTING AND PROCUREMENT
CONSTRUCTION SUPERINTENDENCE Fee: $55
The management of high dollar construction and rehabilitation
projects requires a unique balance of a multiplicity of skills to
coordinate all phases of a project to insure compliance with
schematic design drawings, environmental issues, and scope of work
options. This course will focus on those skills required for a
project to come to successful fruition. This course is appropriate
for project managers, quality assurance personnel, government
inspectors, and contracting officials of private and government
agencies.
Instructor: Raymond Martin
| M | 6:00-8:30 pm | Apr 07-Jun 16 | 25 hrs | 62079 | CBI 125 |
NC DEPARTMENT OF INSURANCE CODE COURSES
For more information on the code courses and the state
certification exam schedule, visit the NC Department of Insurance
website at: www.ncdoi.com. You may purchase the textbooks for
the code courses from the FTCC bookstore or from the Code Council
Section, North Carolina Department of Insurance—please call (919)
661-5880 for information on purchasing textbooks from the Department
of Insurance (allow three weeks for delivery). The textbook—Legal
Aspects of Building Code Enforcement in NC is available from the
FTCC bookstore or the Publications Office, Institute of
Government—please call (919) 966-4119 for information on purchasing
from the Institute of Government.
BUILDING STANDARD INSPECTION, LEVEL I Fee: $60
This course is designed to help you gain a working knowledge of the
NC State Building Code and will be of interest to building
inspectors, contractors, and persons interested in learning the
requirements for a home inspection business. PRE-REGISTRATION IS
REQUIRED. Textbook requirement: NC Building Code 2006, NC
Administrative Code 2006, NC Accessibility Code 2006, and NC
Residential Code 2006.
Instructor: Jerry Thompson
| F& S&S |
6:00-10:00 pm 8 am-8 pm (Sat), 8 am-6 pm (Sun) |
Apr 11-Apr 20 | 48 hrs | 90207 | FTCC/CEC 133 |
BUILDING STANDARD INSPECTION, LEVEL II Fee: $60
This course will help you gain a working knowledge of the NC
State Building Code as it applies to medium size and smaller
building inspections. It is approved by the NC Department of
Insurance for building inspectors desiring to take the Building
Level II exam. PRE-REGISTRATION IS REQUIRED. Textbook
requirement: NC Building Code 2006, NC Administrative Code 2006,
NC Accessibility Code 2006, and NC Residential Code 2006.
Instructor: Jerry Thompson
| F& S&S |
6:00-10:00 pm 8 am-5 pm |
Jun 06-Jun 15 | 40 hrs | 90208 | FTCC/CEC 133 |
ELECTRICAL STANDARD INSPECTION, LEVEL I Fee: $60
This course is designed to help you gain a working knowledge of the
NC State Electrical Code. It is approved by the NC Department of
Insurance for electrical inspectors desiring to take the Standard
Electrical, Level I exam. The material covered in this course should
also help those preparing for the State Electrical Contracting exam.
PRE-REGISTRATION IS REQUIRED. Textbook requirement: National
Electrical Code 2005. NOTE: you will need to bring a
five-function calculator with a square root function to class.
Instructor: Jerry Thompson
| F& S&S |
6:00-10:00 pm 8 am-5 pm |
Apr 25-May 04 | 40 hrs | 90209 | FTCC/CEC 133 |
ELECTRICAL STANDARD INSPECTION, LEVEL II Fee: $55
This course is designed to help you gain a working knowledge of the
NC State Electrical Code. It is approved by the NC Department of
Insurance for electrical inspectors desiring to take the Standard
Electrical, Level II exam.
The material covered in this course should also help those preparing
for the State Electrical Contracting exam.
PRE-REGISTRATION IS REQUIRED. Textbook requirement: National
Electrical Code 2008. NOTE: you will need to bring a
five-function calculator with a square root function to class.
Instructor: Jerry Thompson
| S&S | 8 am-4:30 pm | Jun 20-Jun 29 | 30 hrs | 90210 | FTCC/CEC 133 |
FIRE STANDARD INSPECTION, LEVEL I Fee: $60
This course will help you gain a working knowledge of the NC State
Fire Code as it applies to residential and small commercial
inspections. It will also prepare you to take the NC Fire Standard
Inspection, Level I exam. PRE-REGISTRATION IS REQUIRED. Textbook
requirement: NC Fire Prevention Code 2006.
Instructor: Jeff Johnson
| F& S&S |
6:00-10:00 pm 8 am-5 pm |
Apr 11-Apr 20 | 40 hrs | 90211 | FTCC/CEC 135 |
FIRE STANDARD INSPECTION, LEVEL II Fee: $60
This course will help you gain a working knowledge of the NC State
Fire Code as it applies to the inspection of buildings up to four
stories high at 20,000 squareFeet per floor. It will also prepare
you to take the NC Fire Standard Inspection, Level II exam.
PRE-REGISTRATION IS REQUIRED. Textbook requirement: NC Fire
Prevention Code 2006.
Instructor: Charlie Johnson
| S&S | 8 am-6 pm | Apr 26-May 04 | 36 hrs | 90212 | FTCC/CEC 135 |
FIRE STANDARD INSPECTION, LEVEL III Fee: $55
Are you the person who has the responsibility for inspecting all
sizes and types of buildings and large construction projects? If so,
then this course is for you. It is designed to prepare you for the
NC Fire Standard Inspection, Level III exam. PRE-REGISTRATION IS
REQUIRED. Textbook requirement:NC Fire Prevention Code 2006.
Instructor: Charlie Johnson
| F,S,S | 8 am-5 pm | Jun 06-Jun 08 | 24 hrs | 90213 | FTCC/CEC 135 |
LAW AND ADMINISTRATION Fee: $55
This course is designed for code enforcement officials.
It will cover legal aspects of Building Code Enforcement in North
Carolina and the General Statutes and Rules of the NC Code Officials
Qualification Board. PRE-REGISTRATION IS REQUIRED. Textbook
requirement: Legal Aspects of Building Code Enforcement in
North Carolina, North Carolina Administrative and Enforcement
Requirement Codes, and Rules and Regulations for North
Carolina Administrative Codes.
Instructor: Barrett Graham
| F& S&S |
7:00-9:00 pm 8 am-5 pm (Sat), 8 am-1 pm (Sun) |
Jun 20-Jun 22 | 15 hrs | 90214 | FTCC/CEC 135 |
MECHANICAL STANDARD INSPECTION, LEVEL I Fee: $60
This course will help you gain a working knowledge of the NC State
Mechanical Code as it applies to residential and small commercial
buildings. PRE-REGISTRATION IS REQUIRED. Textbook requirement:
NC Mechanical Code 2006 and NC Fuel Gas Code 2006.
Instructor: Mike Thompson
| S&S | 8 am-5 pm | Apr 26-May 04 | 32 hrs | 90215 | FTCC/CEC 126 |
MECHANICAL STANDARD INSPECTION, LEVEL II Fee: $55
This course will help you gain a working knowledge of the NC State
Mechanical Code as it applies to individuals having the
responsibility of inspecting buildings up to four stories high at
20,000 squareFeet per floor. PRE-REGISTRATION IS REQUIRED.
Textbook requirement: NC Mechanical Code 2006 and NC Fuel Gas
Code 2006.
Instructor: Mike Thompson
| F,S,S | 8 am-5 pm | May 30-Jun 01 | 24 hrs | 90216 | FTCC/CEC 126 |
MECHANICAL STANDARD INSPECTION, LEVEL III Fee: $55
If you have the responsibility for inspecting all sizes and types of
small and large construction projects, then this course is for you.
It is designed to prepare you for the NC Standard Inspection, Level
III exam. Topics will include duct systems, LP gas, ventilation,
special venting, exhaust systems, and other areas as required by the
state. PRE-REGISTRATION IS REQUIRED. Textbook requirement: NC
Mechanical Code 2006 and NC Fuel Gas Code 2006.
Instructor: Mike Thompson
| S&S | 8 am-5 pm | Jun 21-Jun 22 | 16 hrs | 90217 | FTCC/CEC 126 |
PLUMBING STANDARD INSPECTION, LEVEL I Fee: $60
This course will help you gain a working knowledge of the NC State
Plumbing Code. It is approved by the NC Department of Insurance for
plumbing inspectors planning to take the Plumbing Standard
Inspection, Level I exam. PRE-REGISTRATION IS REQUIRED. Textbook
requirement: NC Plumbing Code 2006.
Instructor: Jerry Thompson
| S&S | 8 am-5 pm | May 10-May 18 | 32 hrs | 90218 | FTCC/CEC 133 |
PLUMBING STANDARD INSPECTION, LEVEL II Fee: $55
This course will help you gain a working knowledge of the NC State
Plumbing Code as it applies to individuals having the responsibility
of inspecting buildings up to four stories high at 20,000 squareFeet
per floor. It will also prepare you to take the Plumbing Standard
Inspection, Level II exam. PRE-REGISTRATION IS REQUIRED.
Textbook requirement: NC Plumbing Code 2006.
Instructor: Jerry Thompson
| F& S&S |
6:00-10:00 pm 8 am-7 pm |
Mar 28-Mar 30 | 24 hrs | 90023 | FTCC/CEC 133 |
| F& S&S |
6:00-10:00 pm 8 am-7 pm |
May 30-Jun 01 | 24 hrs | 90219 | FTCC/CEC 133 |